VAN DEN HUL CS-122 (HYBRID) Audio Speaker Cables Terminated (A Pair for 2 speakers)
Available in optional or custom length.
• Cables are high pressure crimped of professional electric crimping tool AIRLOC HIGH PERFORMANCE TERMINATION (for maximum contact surface area).
• Terminated High Quality 24-Gold-Plated Pure Copper Airloc SIGMA Banana spring loaded plugs at the both end.
• The ends finished with colour coded Red & Black and marked (gold arrows) directional branded heat shrink sleeves.
NOTE: The cables are directional so prior to connecting, make sure that the arrows run from the amplifier to the speakers terminals.
AIRLOC a solder-free, airtight perfect fusion between the two metals of cable and plug. This ‘cold weld’ method allows the cable and plug to offer the optimum signal transfer and therefore, better sound quality. It also reduces contact resistance and ensures perfect long-term performance.
Do not hesitate and Try perfect matching VDH CS-122 Speaker Jumper Cables Bi-Wire Link please search by SKU number: 122811 or visit our shop.
REGARDING SIGMA PLUGS
We are proud with our new product and we believe it will improve the sound quality of any audio system.We offer designed to fit the 4mm amplifier and speaker terminal socket found on most high end audio separators such as Arcam, Linn, Quad and Naim amplifiers, these 4mm plugs are constructed from a gold plated red copper connector and the cable termination is by CRIMPING.This plugs is available in three different sizes and fits 2.8mm, 3.4mm and 4mm diameter cable and requires crimping with a heavy duty crimping tool to ensure consistently high levels of performance and connectivity regardless of the conductor cross-section, which has a very important effect on the transmission of a smooth signal and very low resistance unlike mostly available Brass plugs.The spring loaded pin section of the plug allows for optimal connection to the speaker or amplifier terminal socket.
We use professional electric and manual high quality crimping tools to terminated audio cables and we offer the possibility of terminating our products with these plugs.If you want to terminate your cables yourself you will need a crimping tool or you can contact your local Hi-Fi supplier.
Materials such as audio cables and its connections are a very important link in the entire Hi-Fi audio chain, which is why we decided to introduce new plugs, which are made of red copper and their surface is covered with gold, so that the signal flows clearly and without obstacles on the way.
We know metals such as brass or alloy are very contaminated so we want to explain it simply.
For example: a tube filled with hair restricts the flow of water more than a clean tube of the same shape and size.Likewise, electrons can flow freely and easily through a copper wire, but cannot flow so easily through a steel or brass wire of the same shape and size. The difference between copper and brass is related to their microscopic structure and electron configuration and is quantified by the property called resistivity.
Conductivity refers to the ability of a material to transfer energy. There are different types of conductivity, including electrical, thermal and acoustic conductivity. The most electrically conductive element is pure silver, followed by very close are copper and gold. Silver also has the highest thermal conductivity of all elements and the highest light reflectance.While it is the best conductor, copper and gold are more commonly used in electrical applications because copper is less expensive and gold has a much higher corrosion resistance.As silver tarnishes, it is less desirable at high frequencies as the outer surface becomes less conductive.
Brass has six times weaker conductivity than copper.
Brass oxides they are hard and highly contaminated, strongly adhering and act as an effective insulator, while copper oxides are softer and conductive. Therefore, connections and terminations of copper wires are almost the best conductor of electricity, unfortunately most of the available plugs on the market are made of brass.
Why did we name our plugs Sigma? because electrical conductivity is measured in Siemens per meter (S / m) and is commonly denoted by the Greek letter σ (Sigma).
• VDH Bi-Wire Link (Speakers Jumpers Cable).
• VDH TERMINATED SPEAKERS CABLE WITH DIFFERENT CONNECTORS.
• We offer standard Sales Units / Lengths: 100m reels or custom length; With connectors mounted to specifications: any length or without connectors Jacket Colours Available: Red and Black or Transparent.
We can offer different combination Spade connectors and 24Gold-Plated BFA Z-Type 4mm plugs (Compatible with
Arcam – Linn – Cyrus and all other good quality audio products).
• *100% High quality*
• *fully tested*
• *guarantee of quality*
• *We send all item/s within 1-2 days*
• Each conductor exhibits a cross-section area of 2.96 mm², equalling AWG 12
• Covering the two conductors you find an extra Linear Structured Carbon ® saturated layer to improve the sonic performance and to transform the radiated magnetic field into an audio-signal again.
• The resistance per lead is: 0.58 Ohm/100 meter.
• The capacitance between the 2 leads is: 32 pF/meter.
• The cable jacket is made of HULLIFLEX ® 3, a very flexible and mechanically superb insulation material.
• The insulation of the plus and minus leads is different in shape with printing in the flat middle section. Both properties are easy polarity finders.
“The CS-122 Hybrid is an updated version of one of vdH’s classic speaker cables, and sports two conductors made of 147 strands of 0.16mm diameter, high-purity, matched-crystal oxygen-free copper with a very dense pure-silver coating, alongside a carbon saturated layer that is said to improve the sound. The cable jacket is also made of Hulliflex and is described as “a very attractive matt cream colour”. During the debrief one of our panelists counters: “it looks like something you see in a hospital”!.”
What Van Den Hul say
This twin lead loudspeaker cable is the twin version of the CS – 12 HF. Main aim is to provide a high quality flat twin lead cable at a low price. The 2 conductors are made of 147 strands of 0.16 mm. diameter high purity Matched Crystal OFC with a very dense pure silver coating. Each conductor exhibits a cross-section area of 2.96 mm, equalling AWG 12.5. Covering the two conductors you find an extra Linear Structured Carbon ® saturated layer to improve the sonic performance and to transform the radiated magnetic field into an audio-signal again. The resistance per lead is: 0.58 Ohm/100 meter. The capacitance between the 2 leads is: 32 pF/meter. The cable jacket is made of our HULLIFLEX ® 3, a very flexible and mechanically superb insulation material. The insulation of the plus and minus leads is different in shape with printing in the flat middle section. Both properties are easy polarity finders. Type printing on every 25 cm. (10″) makes cutting of specified lengths very easy. This cable is available in a very attractive matt cream colour. Our 4.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors and our DIY Screw-On Speaker Connectors are excellently suited for the CS122 HYBRID.
We are an authorised VDH Cables dealership, so you can be assured of new and genuine products, covered by a full manufacturers warranty.
If you would like a different combination of spade connectors and banana plugs, or different cable lengths, please feel free to contact with us.
Please have a look at our other items, Any questions please contact with us.Thanks for looking.
There are no reviews yet.