Description
VAN DAMME White Series Install Grade UPOFC 2 x 2.5mm2 LSZH ECOFLEX Terminated Audio Speaker Cable.
A pair for two speakers.
Available in optional or custom length (Please contact us).
If you needed 2 x 4mm or 2x 6mm diameter conductors or Bi-Wire configuration please look for our other items, or please feel free to contact us.
• Cables are high pressure crimped of professional electric crimping tool Hex Gun (for maximum contact surface area).
• Terminated High Quality 8x 24-Gold-Plated Airloc Banana 4mm spring loaded plugs at the both end.
• The ends finished with colour coded Red & Black heat shrink sleeves.
AIRLOC a solder-free, airtight perfect fusion between the two metals of cable and plug. This ‘cold weld’ method allows the cable and plug to offer the optimum signal transfer and therefore, better sound quality. It also reduces contact resistance and ensures perfect long-term performance.
” I’ve relied on high-priced cables from well-known brands in the past and didn’t think I could do much better at a fair price until I discovered Van Damme. Van Damme cables have elevated my recording and mastering chain, enabling us to create music that sounds incredible. And on top of this, the customer service provided is professional and flexible enough to allow specific requests, which is very important to us as a busy recording studio.”
Description:
• IEC 60332.3C Fire retardancy of bunched cables
• IEC 60754.1 Amount of Halogen Gas Emissions
• IEC 60754.2 Degree of acidity of released gases
• IEC 61034.2 Measurement of smoke density
UPOFC stands for Ultra Pure Oxygen Free Copper. Van Damme now use a higher purity oxygen free copper for the conductors that is UPOFC. The use of this material further improves the solder-ability and conductivity of the conductor resulting in faithful and transparent signal reproduction. Van Damme White Line Install Grade 2 x 2.5 mm – Speaker Cable is a high quality speaker cable suitable for any system from budget up to high end.
This speaker cable is designed to withstand the demands of live and touring use with a tough, yet, flexible, outer sheath. The conductors feature ultra pure oxygen free copper (UPOFC) for accurate tranmission and outstanding sonic integrity.
Key Features:
• All conductors use Bare UPOFC and are insulated with SHF1 LSZH thermoplastic polymer (Red and Blue) Red is taken to be positive, Blue negative
• Conductors : 2 x 2.5mm2 (13AWG) OFC
• Conductor stranding : 50 x 0.25mm, bare ultra pure oxygen free copper
• Two conductors : Red and Blue insulation
• Insulation : SHF1 LSZH Thermoplastic polymer
• Overall jacket colour : PURE WHITE
• Outer jacket : ECOFLEX SHF1 LSZH Thermoplastic polymer pure White RAL 9010
• Conductor resistance : 7.30 ohm/Km
• Working voltage : 300/500V
• Test voltage : 2000V DC for 1 minute
• Overall diameter : 7.6mm
• Weight : 102Kg/Km
• Operating temperature : -35 to +70 ⁰C
Wire cross section (wire diameter)
Contrary to appearances, this is an important factor, because it depends not only on the volume of the sound, but also on the acceptable power output.So if is the thicker conductor wire then the lower its resistance and the greater the current strength. On the other hand, do not overdo it with its diameter. For example, using a large section cable in a small set of computer speakers is pointless, because the benefits will be very small, and even none.The sale of speaker cables is available in 4 cross-sections:
1.5 mm2 – 2.5 mm2 – 4.0 mm2 – 6.0 mm2
As for the length of the speaker cables, the rule is: the shorter the better. The excess of the cable unnecessarily increases its resistance, the more so that the resistance in the cable counts double: from the amplifier to the loudspeaker and back. Thus, every meter more 2-wire cable is like 2 meters more in its entire length. For the same reason, it is important to remember that the length of the cable is the same in both channels (left and right), both in the stereo system and the home theater. In home cinema systems, the front speaker cables are usually shorter than to the rear speakers, but it is important that the speakers of each pair (front or rear) are powered with a cable of the same length. Theoretically, there is no upper limit when it comes to the length of the speaker wire, but they are the sizes recommended by specialists depending on the impedance (the smaller the impedance, the greater the current flows in the cable, so it must be shorter). Here they are for copper wires:
Also Available:
• Van Damme Blue & Black Series Speaker Cable 2x 1.50mm, 2x 2.50mm, 2x 4mm, and Hi-Fi Series LC-OFC
• Van Damme Audio Interconnect Phono Cable
• Van Damme Subwoofer cable for REL & BK
• Van Damme Bi-Wire Link (Speaker Jumpers Cables)
Please Visit Our Shop.
• We offer standard Sales Units / Lengths: 50m reels or custom length; With connectors mounted to specifications: any length or without connectors Jacket Colours Available: Red and Black or Transparent.
• We can offer different combination Spade connectors and 24Gold-Plated BFA Z-Type 4mm plugs (Compatible with Arcam – Linn – Cyrus and all other good quality audio products).
We are an authorised VDC Cables dealership, so you can be assured of new and genuine products, covered by a full manufacturers warranty.

• 100% High quality
• Fully tested
• Warranty of quality
• We send all item/s within 1-2 days
If you would like a different combination of spade to spade connectors, or banana plugs to spade connectors, or different cable lengths, please feel free to contact us.
Please have a look at our other items, Any questions please contact with us.Thanks for looking.












Reviews
There are no reviews yet.