Van Damme Professional Cables Available in Optional length and Conductor Size.
Blue Series Studio Grade UPOFC Classic Pro 2×2.5mm or 2x4mm Twin-Axial Speaker Cable Terminated with NEUTRIK SPEAKON Connectors NL2FX at the both end.
• This cable will perfect to connecting Speakers to Amplifiers, Tops to Subs, etc. The leads are wired…..
• The ends of cable isolation used secured black heat shrink sleeves inside Neutrik connectors.
• Neutrik Speakon connectors and Van Damme’s incredibly tough Blue Series Ultra Pure Oxygen Free Copper’ (UPOFC) twin conductor speaker cable.
If you would like diferent CONDUCTOR SIZE or LENGTH using the options above.
Wire cross section (wire diameter).
Contrary to appearances, this is an important factor, because it depends not only on the volume of the sound, but also on the acceptable power output.So if is the thicker conductor wire then the lower its resistance and the greater the current strength. On the other hand, do not overdo it with its diameter. For example, using a large section cable in a small set of computer speakers is pointless, because the benefits will be very small, and even none. The sale of speaker cables is available in 6 cross-sections:
– 0.75 mm2 – 1.0 mm2 – 1.5 mm2 – 2.5 mm2 – 4.0 mm2 – 6.0 mm2
The length of the wire.
As for the length of the speaker cables, the rule is: the shorter the better. The excess of the cable unnecessarily increases its resistance, the more so that the resistance in the cable counts double: from the amplifier to the loudspeaker and back. Thus, every meter more 2-wire cable is like 2 meters more in its entire length. For the same reason, it is important to remember that the length of the cable is the same in both channels (left and right), both in the stereo system and the home theater. In home cinema systems, the front speaker cables are usually shorter than to the rear speakers, but it is important that the speakers of each pair (front or rear) are powered with a cable of the same length. Theoretically, there is no upper limit when it comes to the length of the speaker wire, but they are the sizes recommended by specialists depending on the impedance (the smaller the impedance, the greater the current flows in the cable, so it must be shorter). Here they are for copper wires:
Van Damme cables are used in many professional systems and critical near field monitoring in recording and mastering studios worldwide. Van Damme is the industry standard in sound production, television, film and radio studios as well as live broadcasts and music performances.
FEATURES AND BENEFITS:
Van Damme Blue Series Studio Grade Classic 268-525-060 2.5mm or 268-545-060 4.00mm conductors ideally suited for medium/long runs of low impedance speaker signals.
Van Damme Blue Series Studio Grade Speaker Cable caters not only for the recording studio environment but also for the rehearsal studio, live and presentation markets.
The Blue Series Studio Grade Speaker Cable works particularly well for systems that are naturally bright sounding or a little forward sounding. The cable equally works well with most systems, due to its solid dynamic range.
The large copper conductors produce a pristine sound with deep bass, clear top end and a solid mid range, with absolute accuracy to the point of making you feel involved in the music/film.
Van Damme Blue Series Studio Grade Speaker Cable caters not only for the studio recording environment but also for the HiFi Systems and Home Cinema Systems. What better way to listen to your music, than using the cable that was used to record your media.By using a thicker cable, you increase the dynamic range, and add detail and resolution to the sound you are carrying.
SPECIFICATIONS:
For: 2.50mm2
• Overall diameter 7.6mm
• Twin-Axial 2 x 2.50mm2
• Weight 102kg/km
• Conductor stranding 147 x 0.15mm
• Conductor resistance 7.3 ohm/km
• Bare ultra pure oxygen free copper conductor
• PVC Insulation
• Flexible PVC composite sapphire blue RAL 5003 Jacket
For: 4.0mm2
• Overall diameter 12,4mm
• Twin-Axial 2 x 4mm2
• Weight 230kg/km
• Conductor stranding 227 x 0.15mm
• Conductor resistance 4.6 ohm/km
• Bare ultra pure oxygen free copper conductor
• PVC Insulation
• Flexible PVC composite sapphire blue RAL 5003 Jacket
WHAT THIS CABLE IS USED FOR
CONNECT YOUR:
• Speakers
• Subwoofer,
etc
TO YOUR:
• Amplifier
• Receiver
etc
Van Damme Speaker Cable Available in 1.5mm, 2.5mm, 4.0mm and 6.0mm Conductor Size.
Also Available:
• Van Damme Blue & Black Series Speakers Cable 2x 2.50mm, 2x 4.0mm, 2x 6.0mm 4x 4.0mm and Hi-Fi Series LC-OFC
• Van Damme Subwoofer cable for REL & BK
• Van Damme Bi-Wire Link (Speaker Jumpers Cables)
• Van Damme Shotgun Audio Twin Interconnect
Please Visit Our Shop.
We send all item/s within 1-2 days.
Please have a look at our other items, Any questions please contact with us.Thanks for looking.
Reviews
There are no reviews yet.