Van Den Hul The Clearwater Speakers Jumper-Links Cables (Set for Two Speakers).

(1 customer review)


5 in stock

SKU: 121971 Category:

A Pairs 20cm length (Set for Two Stereo Speakers) Van Den Hul – THE CLEARWATER Hi-Fi Bi-Wire Link (Speakers Jumper Cables).

The cables is high pressure crimped of profesional crimping tool AIRLOC HIGH PERFORMANCE TERMINATION (for maximum contact surface area).One end high quality 24 gold-plated spade connectors, other end high quality 24 gold-plated banana plugs Z-Type with extra crimped pins section (see photos), and all ends finished with colour coded Red & Black heat shrinks.


AIRLOC a solder-free, airtight perfect fusion between the two metals of cable and plug. This ‘cold weld’ method allows the cable and plug to offer the optimum signal transfer and therefore, better sound quality. It also reduces contact resistance and ensures perfect long-term performance.


• VDH JUMPER-LINKS cable Terminated with HQ 8mm Width of opening universal Spade connectors on both ends.


• *100% High quality*
• *fully tested*
• *guarantee of quality*
• *We send all item/s within 1-2 days*


I wanted to add a few words from me.
Repeatedly tested my products and reaching for feedback from my clients and I’m certain that the results are better than with the original links and that bi-wiring there is unnecessary and expensive.  All in all, my customers rate this as a very good value up-grade. 


If you would like a different combination of spades to spades connectors, or banana to banana plugs, or different  jumpers  lengths, please feel free to contact us. Please have a look at our other items, Any questions please contact with us.Thanks for looking.

Additional information

Weight 0.1 kg

van den Hul

Connector A

BFA Z-Type Plugs

Connector(s) B

8mm Width Crimped Spade Connectors


Bi-Wire Speakers Jumpers Cable

Cable Length


Manufacturer warranty

1 year






14 AWG

Country/Region of Manufacture



• The decision was taken to work with 2 groups of strands with a conductor size of AWG 14; this because in many situations the distance between the amplifier and the loudspeakers is limited.
• Therefore a twin-lead construction was made with 2 x 98 strands of a dense very pure silver coated Matched Crystal (MC) OFC.
• The two conductor groups are twisted in opposite directions.
• The resistance of each lead is: 0.9 Ohm/100 meter.
• The capacitance between the two conductors is: 17.5 pF/meter.

1 review for Van Den Hul The Clearwater Speakers Jumper-Links Cables (Set for Two Speakers).

  1. Smit (verified owner)

    Excellent product, the best upgrade for biwireable speakers. Recommended!

Only logged in customers who have purchased this product may leave a review.

Please note, free shipping for some items to EU only, shipping to other destinations will incur a charge, please see rates for your region,or contact us.

Certain Items we can only ship to Europe addresses, if you are unsure please contact us.

All items will be shipped to your registered Pay Pal Address, or the registered address of your chosen payment.

Once we receive your order, it will be processed, you will then receive a confirmation email as soon as possible.

All items over €50 are insured against loss or damage.

We try to dispatch all goods on a same or next working day basis dependent of time of order, at certain times due to high demand there could be a slight delay, if this occurs we aim to dispatch as soon as possible.

On Bank Holidays, Weekends and Evenings you may receive notification of dispatch, this indicates the item has been picked, prepared, and sent for dispatch, it will actually be collected by DPD or other COURIER on the next available working day.

Should there be any problems with your order we will contact you to discuss the options.

Larger items will be dispatched by a courier on a 9am to 6:30pm delivery, if we have your email address through order.

Optional delivery times are available at an additional cost, please contact for details.

Smaller items will be sent Polish Mail Recorded and insured.

Smaller items with a low value may not be sent recorded.

All goods must be signed for.

In the event that no one is in the driver will leave a card, you should contact the courier direct with the details on the card, to arrange an alternative time for delivery.

You must contact the courier in the time specified on their card, or goods will be returned to us and additional shipping costs may apply.

When your goods arrive;
Sign for the number of boxes you receive.

Check all boxes for visible damage, if you find them to be damaged either do not accept them, or sign DAMAGED.

You must notify us before the next working day so we can contact the courier to claim from their insurance.

Failure to do this, and we can not accept liability for any damage.