4 x 20cm (A Pair for Two Speakers) QED XT-400 Reference X-TUBE HI-FI Bi-Wire Link (Speakers Jumper Cables) Terminated 4x (Universal Fit 4mm) QED AIRLOC Metal Forte Banana Plugs, other end 4x (Universal Fit 6-8mm width of opening) QED AIRLOC Metal Forte ABS Spade Connectors, and all ends finished with colour coded Red & Black heat shrinks Sleeves.
*****HIGH PERFORMANCE TERMINATION, NEW QED AIRLOC SUPERIOR METAL FORTE PLUGS, PREMIUM GOLD PLATING with extra pin section *****
AIRLOC a solder-free, airtight perfect fusion between the two metals of cable and plug. This ‘cold weld’ method allows the cable and plug to offer the optimum signal transfer and therefore, better sound quality. It also reduces contact resistance and ensures perfect long-term performance.
• The XT-400 Bi-Wire Link (Speaker Jumpers Cable) listed is a Pair length of Speakers.
• Factory Terminated with 4x QED AIRLOC Metal Forte banana plugs to 4x QED AIRLOC Metal Forte Spade Connectors.
So what do I do with these jumper cables
Well, almost all speakers come with standard grade copper jumpers (bare rails). For a quick and effective upgrade to your bi-wirable speakers simply remove the standard connectors bare rails and affix ours for instant Qed.
Also Available:
The QED other Bi-Wire Link (Speaker Jumpers Cables)
The QED Analogue Interconnects
The QED other Speaker Cables
Highest Quality on the market®
QED’S MULTI-AWARD WINNING XT400 SPEAKER CABLE, UTILISING X-TUBETM TECHNOLOGY
Silver-plated oxygen-free copper tubular conductor geometry. For use in the finest hi-fi and home theatre systems. This design delivers a massive cross-sectional area using X-TubeTMtechnology to eliminate the skin effect whilst maintaining a user friendly “figure of 8” geometry. This is QED’s ultimate affordable upgrade for high end systems.
X-TUBE TECHNOLOGY
.jpg)
At low frequencies both X-TubeTM and conventional stranded/solid core speaker cables convey signals in a linear way. However, at high frequencies, X-TubeTM retains a near-linear signal transfer, whereas the conventional cables fail to conduct uniformly across the entire conductor area.
In standard speaker cables at high frequencies current flow is highest at the periphery with rapidly deteriorating current density towards the centre of the conductor.
The effect of this is to reduce the actual cross sectional area of the cable at 15kHz to less than 75% of that at low frequencies. This results in higher distortion and compromises the performance of the cable.
X-TubeTM with polycore technology exhibits much lower self-inductance and is therefore less affected by this problem. The polycore technology reduces loop inductance to levels only achievable using more costly and difficult to terminate cables.
The result is more high frequency detail, less distortion and greater performance.
The What Hi-Fi? Five Star award winning XT-400 cable.
What Hifi Magazine’s Best Speaker Cable For 2004
Silver plated 99.999% oxygen free copper conductors
Provides a low frequency path for the audio signal and delivers stunning high frequency detail.
Specifications
Wire gauge – 12 AWG
Jacket OD – 6.00 mm
Cross-sectional area – 4.00 mm²
Loop resistance – 0.008 Ω/m
Capacitance – 43 pF/m
Inductance – 0.50 µH/m
Dissipation factor – 0.0400
Recommended for all high end installations
Stranded Diameter – 2.75 mm (min)
Suitable for ABS, Metal & Maxi Airloc
QED Lifetime Guarantee
About QED Cables:
British audio specialists QED has been designing and engineering superior AV cables for nearly five decades and is considered the original cable brand, with its QED 79 strand cable, released in 1976, widely recognised as the world’s first “specialist” speaker cable – a product that demonstrated how cables could have a tangible impact on audio performance. Since then, the company has used extensive scientific research and computer-aided design techniques to ensure its products remain at the very cutting edge of technology. That rich heritage and constant drive for innovation underpins QED’s latest products. All cables deliver an enhanced sonic performance without compromising on their competitive price points
*100% High quality*
*fully tested*
*guarantee of quality*
*We send all item/s within 1-2 days*
Hi Dear Watchers.I wanted to add a few words from me.
Repeatedly tested my products and reaching for feedback from my clients and I’m certain that the results are better than with the original links and that bi-wiring there is unnecessary and expensive. All in all, my customers rate this as a very good value up-grade.
If you would like a different combination of spade to spade connectors, or banana to banana plugs , or different jumpers lengths, please contact us.Please have a look at our other items.Thanks for looking.
Reviews
There are no reviews yet.