DH-Labs Odyssey MK2 Dual Core Speaker JUMPER-LINKS Cable (Set for two Speakers)

£28.00

8 in stock

SKU: 121326 Category:

DH-Labs Odyssey MK2 Dual Core Speaker JUMPER Cable.

4x 20cm A Pair (For two speakers)

The cables is high pressure crimped of professional crimping tool AIRLOC HIGH PERFORMANCE TERMINATION (for maximum contact surface area).Terminated at the both ends high quality 24 gold-plated 8mm (Width of opening) universal spade connectors.

The ends finished with high quality branded colour coded Red & Black (marked arrows) heat shrinks sleeves.

AIRLOC a solder-free, airtight perfect fusion between the two metals of cable and plug. This ‘cold weld’ method allows the cable and plug to offer the optimum signal transfer and therefore, better sound quality. It also reduces contact resistance and ensures perfect long-term performance.

 

So what do I do with these jumper cables?

Well, almost all speakers come with standard grade copper jumpers (bare rails). For a quick and effective upgrade to your bi-wirable speakers simply remove the standard connectors bare rails and affix ours for instant DH-LABS.

 

NOTE: The cables are directional so prior to connecting, make sure that the arrows run from the LF-Network speaker Terminals to the HF-Network speaker Terminals.

 

Also Available:
• The DH-LABS Speaker cables.

Please Visit Our Shop.

Hi Dear Watchers.I wanted to add a few words from me.

Repeatedly tested my products and reaching for feedback from my clients and I’m certain that the results are better than with the original links and that bi-wiring there is unnecessary and expensive. All in all, my customers rate this as a very good value up-grade.

“Step up your speakers and get more performance out of your equipment, with the DH-LABS Bi-Wire jumpers”

 

About Dh-Labs Odyssey MK2

“Do speaker cables make a great difference in sound quality? Some people emphatically believe so. Other people think that all speaker cables sound the same regardless of price or quality of construction.

My opinion? I hear substantial differences, at best, between different brands of good quality cables. But differences between good quality and poor quality cables are much clearer.

Obviously, a high end speaker cable won’t magically allow a mediocre system to sound like a high end system, but a poor quality cable can substantially reduce the audio quality of any system.

To someone with my budget, the improvement in audio quality attained by the use of high end cables as opposed to affordable cables is simply too small to justify paying the high price; for the cost of an expensive set of speaker cables, I could replace my digital and analog sources, thereby achieving a far greater improvement in sound quality.

The question arises: are there any affordably-priced cables that will make a significant improvement in my system over standard, mass-market type speaker cables?

Labs, located in Jupiter, Florida in the Southeastern United States, produces cables for hi-fi audio use at prices that are not much higher than typical, mass-market cables. Of course, the company claims the cables to be high quality, but are they worth the extra cost above standard cables? Better still, could they be a bargain for the budget-minded, audio enthusiast?

Positive Impressions:

My initial impression of the Silver Sonic cables was that they lacked bass. It seemed as though bass was lost in the changeover from heavy-gauge, mass-market cables. After several tests, what became apparent was that the Silver Sonics did not have less bass; they had cleaner bass. The bass extension was still intact and all the bass was present, but it was tighter and better controlled with the this cable. Bass drums sounded deep and clean instead of booming and resonant; kick drums sounded quick and sharp. Bass response with the heavy gauge, standard cables tended to sound a little bloated and imprecise. This was an impression that was not welcome.

In the mid-range, the Silver Sonics again sounded cleaner than standard cables. However, unlike the bass, the mids seemed to have a stronger presence with the Silver Sonics. The mids did not sound as though they were being accentuated, but rather, the mids sounded less muted and more natural. The Silver Sonic Cables also had clearer and cleaner highs. The highs sounded slightly brighter and more detailed.Playhad cleaner, smoother, and more musical highs with the Silver Sonics.Well-recorded CDs sounded better than ever. The overall sound seemed more balanced and neutral.

Changes to the sound stage were more subtle with my system. The soundstage seemed somewhat broader and slightly deeper with many recordings, but remained unchanged with others. Three-dimensional imaging was noticeably clearer and more distinct.

D.H. Labs Silver Sonic speaker cables offer great value for the money. They do what speaker cables are supposed to do, which is, to transmit as much signal as possible between amplifier and speaker while adding a minimum of sonic artifacts, and they do it at a price that is not only reasonable, but a genuine bargain”.

Music lovers looking for open and dynamic sounding cables, without an unlimited budget, are invited to take any Odyssey with DH Labs. With its 14 awg multi-strand OFHC copper conductors and PE dielectric, the Odyssey is sure to satisfy all of the serious music lovers that have revered the natural sound of DH Labs cables for 19 years. Odyssey’s low price, flexibility and attractive appearance also make it perfect for home theater use!?

 

 

SPECIFICATIONS:

• Conductors: Dual Core Twist 2 x 1.8mm (2 x 14AWG) of one each Jumper
• FEP-insulated conductors are built from multi-strand oxygen-free copper
• Bare stranded copper with FEP insulation in a dual pair configuration
• PVC heat shrink sleeves outer jacket
• Cable is Terminated

 

*100% High quality*

*fully tested*

*guarantee of quality*

*We send all item/s within 1-2 days*

 

If you would like a different combination of Spade to Banana plugs, or different Jumpers lengths, please contact us.

Please have a look at our other items, Any questions please contact with us.Thanks for looking.

Additional information

Weight 0.1 kg
Connector A

8mm Width Crimped Spade Connectors

Cable Length

20cm

Type

Bi-Wire Jumper-Links Cable

Connector(s) B

8mm Width Crimped Spade Connectors

Brand

DH-LABS

Manufacturer warranty

1 year

MPN

ODYSSEY

EAN

5060271594375

Gauge

14 AWG

Country/Region of Manufacture

United States

Specifications

• Conductors: Dual Core Twist 2 x 1.8mm (2 x 14AWG) of one each Jumper
• FEP-insulated conductors are built from multi-strand oxygen-free copper
• Bare stranded copper with FEP insulation in a dual pair configuration
• PVC heat shrink sleeves outer jacket
• Cable is Terminated

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Please note, free shipping for some items to EU only, shipping to other destinations will incur a charge, please see rates for your region,or contact us.

Certain Items we can only ship to Europe addresses, if you are unsure please contact us.

All items will be shipped to your registered Pay Pal Address, or the registered address of your chosen payment.

Once we receive your order, it will be processed, you will then receive a confirmation email as soon as possible.

All items over €50 are insured against loss or damage.

We try to dispatch all goods on a same or next working day basis dependent of time of order, at certain times due to high demand there could be a slight delay, if this occurs we aim to dispatch as soon as possible.

On Bank Holidays, Weekends and Evenings you may receive notification of dispatch, this indicates the item has been picked, prepared, and sent for dispatch, it will actually be collected by DPD or other COURIER on the next available working day.

Should there be any problems with your order we will contact you to discuss the options.

Larger items will be dispatched by a courier on a 9am to 6:30pm delivery, if we have your email address through order.

Optional delivery times are available at an additional cost, please contact for details.

Smaller items will be sent Polish Mail Recorded and insured.

Smaller items with a low value may not be sent recorded.

All goods must be signed for.

In the event that no one is in the driver will leave a card, you should contact the courier direct with the details on the card, to arrange an alternative time for delivery.

You must contact the courier in the time specified on their card, or goods will be returned to us and additional shipping costs may apply.

When your goods arrive;
Sign for the number of boxes you receive.

Check all boxes for visible damage, if you find them to be damaged either do not accept them, or sign DAMAGED.

You must notify us before the next working day so we can contact the courier to claim from their insurance.

Failure to do this, and we can not accept liability for any damage.