Chord Epic Super Twin BI-WIRE AUDIO SPEAKER CABLES 2 x 1.5m (A Pair) Terminated

£280.00

2 in stock

SKU: 1222011111 Category:

2 x 1.5m (A Pair) CHORD Company Epic Super Twin Bi-Wire 4:4 or 4:2 Configuration (Upon request) Terminated Audio Speaker Cables.

The Cables are high double pressure crimped of professional crimping tool AIRLOC HIGH PERFORMANCE TERMINATION (for maximum contact surface area)To a Very high quality 24 gold-plated AIRLOC Banana plugs at the both end.

All ends finished with colour coded black and red (directional gold arrows) double heat shrink sleeves.

Additionally we can offer all strip of connectors ends They are coated with extra RED & BLACK High Density Matte Solid Expandable Braided Cable Sleeving.It is the Tight, High Quality, High Density, Matte, Solid Sleeving Which protects and hides wires while Increasing air flow.Please feel free to contact before purchase.

Highest Quality Terminated Cable on the market®

NOTE: The cables are directional so prior to connecting, make sure that the arrows run from the amplifier to the speakers terminals.

AIRLOC a solder-free, airtight perfect fusion between the two metals of cable and plug. This ‘cold weld’ method allows the cable and plug to offer the optimum signal transfer and therefore, better sound quality. It also reduces contact resistance and ensures perfect long-term performance.

Chord Epic Twin (Single Wire Configuration) or Bi-Wire Link (Speaker Jumpers Cables) also available.

Please Visit Our Shop.

*****We can offer different combination Chord Spade Connectors or Banana 24Gold-Plated BFA Z-Type 4mm plugs (Compatible with Arcam – Linn – Cyrus and all other good quality audio products).*****

If you have any questions please contact with me.

 

OVERVIEW: Epic Super Twin

The Chord Epic Super Twin speaker cable is the result of a successful marriage of two of Chord’s award winning speaker cables. The Chord Epic Super Twin speaker cable’s silver-plated oxygen free copper conductors, Teflon insulation and silicone surround are borrowed from Chord Odyssey speaker cable and the shielding system is taken from the Chord Signature speaker cable. The development and success of Signature speaker cable proved conclusively that shielding speaker cable could bring some serious improvements to sound quality. The lessons learnt during its development means that we can now apply the same principles to other cables within the Chord range.

2mm diameter silver-plated oxygen free copper conductors
Twisted pair configuration, Silicone internal jacket
High frequency effective dual foil and braid shielding system
Vibration damping translucent PVC outer jacket

IN DEPTH INFO:

“Bass is really well controlled and tight, while timing is excellent. To sum up these cables in one word, they are ‘musical’. In short, they are quite simply a superb sounding set of speaker cables”

The Chord design team have applied the lessons learned in designing the Signature speaker cable to the Chord Epic Super Twin speaker cable. Shielding the conductors from electromagnetic interference brings great advances in sound quality. Together with Silver plated OFC conductors separated by Teflon insulation, the noise reduction possible is immediately clear when listening. Between each note is an inky black silence, timing of notes seems improved, and dynamics appear more dramatic. Being a 4 core speaker cable, this speaker cable is ideal for bi-wiring or bi-amping applications. Terminated in Chord 4mm gold plated banana plugs, Epic Super Twin is a superbly musical speaker cable ideal for high performance hifi and AV systems.

*****HI-FI Choice Sept 2014*****

Chord Epic speaker cable is the result of a happy marriage between two of our award winning speaker cables. Epic uses the same conductors as Chord Odyssey, and the shielding, visible through its translucent jacket is taken from our Signature speaker cable. The shielding brings big improvements right across the frequency range. There is space around individual instruments and the timbre of instruments is easy to hear. Violins, cellos and violas sound more realistic, likewise pianos, bass notes have great definition and rhythms are easy to follow and get involved with.

Fitting properly effective shields to speaker cable is a pretty big deal and fitting shielded speaker cable to your system can border on astonishing. The reduction and the level of perceived noise means that very fine dynamic and tonal information is easily heard, and brings improvements not only to the high frequency performance of a system, but also the bass and mid frequencies. The space around notes and the extra harmonic content that Epic can bring to a system is really surprising. The complex harmonic information that makes up the timbre of stringed and bowed instruments is carried extremely accurately.

Epic could bring some serious improvements to the sound quality of your system, and it’s a big step toward making a real connection with your music.

The Chord Company is delighted to announce two new additions to their Speaker Cable range; Epic Twin (dual-conductor) and Epic Super Twin (twin dual-conductor). Chord have resisted referring to the Super Twin as a bi-wire cable because while it certainly produces outstanding results when connected in bi-wire configuration, the conductors can also be paralleled together to produce an outstanding speaker cable for speakers with only one set of inputs. The two cables are available now.

Epic is the result of combining elements of two of Chord’s most popular cables, Odyssey and Signature. By taking the shielding system used on the Signature and adapting it to suit Odyssey, the Chord Company has been able to produce a speaker cable that combines the strengths of both cables.

Epic like Odyssey features two conductors each made up of 19 strands of silver-plated oxygen free copper conductors. Chord has always used multi strand conductors in their speaker cables but favour fewer, heavier gauge conductors over fine stranded rope weave designs. The overall diameter of each conductor is 2.5 mm. The two conductors which are twisted together are insulated by Teflon® and th en surrounded by a silicone jacket.

Epic has the addition of a dual shielding system applied to the outer silicone of Odyssey that is then surrounded with a special PVC jacket to further improve mechanical damping. The PVC jacket itself is extremely pliable and finished in a translucent grey with an overall diameter of 10.5 mm for Epic Twin and 15 mm for Epic Super Twin.

Epic Super Twin uses four sets of the same conductors in twin twisted pair configuration. This makes for very consistent performance characteristics between the single and dual versions.

The Chord listening team have experimented with Epic in a variety of systems and would emphasise that the construction of the cable (in particular the shielding system) allows this cable to produce a significant improvement in performance when fitted to any well balanced system, almost regardless of system cost. – Teflon is the registered trade mark of DuPont TeflonP

 

*100% High quality*

*fully tested*

*guarantee of quality*

*I send all item/s within 1-2 days*

 

If you would like a different combination of spade connectors and banana plugs, or different cable lengths, please ask.

Please have a look at our other items, Any questions please contact with me.Thanks for looking.

 

Additional information

Weight 1.80 kg
Connector A

Airloc Crimped 4mm Banana Plugs

Brand

Chord Company

Connector(s) B

Airloc Crimped 4mm Banana Plugs

Type

Bi-Wire Speaker Cable (Terminated)

MPN

EPICSUPERTWINBW

Cable Length

2x 1.5m

Gauge

12 AWG

Sub-Type

Super Twin

Country/Region of Manufacture

United Kingdom

EAN

5036694010174

Terminals

AIRLOC CRIMPED BANANA PLUGS x16

Manufacturer warranty

2 YEARS

Specifications

• Conductors: 4 x 12 AWG 19 strand silver-plated oxygen free copper.

• Configuration: Two Sets of Twisted pair configuration.

• Conductor insulation: PTFE (Polytetrafluoroethylene). We believe that to obtain the most neutral tonal characteristic from silver-plated conductors it is vital to use PTFE insulation. White with red stripe is positive, white is negative.

• Internal conductor surround: PVC.

• Shielding: Dual layer, high density braid and overlapped foil.High density foil and 93% coverage metal braid

• External jacket: PVC.

• Diameter: 16mm.

• Colour: Translucent brown

Reviews

There are no reviews yet.

Be the first to review “Chord Epic Super Twin BI-WIRE AUDIO SPEAKER CABLES 2 x 1.5m (A Pair) Terminated”

Your email address will not be published. Required fields are marked *

Please note, free shipping for some items to UK mainland only, shipping to other destinations will incur a charge, please see rates for your region,or contact us.

Certain Items we can only ship to UK Mainland addresses, if you are unsure please contact us.

All items will be shipped to your registered Pay Pal Address, or the registered address of your chosen payment.

Once we receive your order, it will be processed, you will then receive a confirmation through email as soon as possible.

All items over £50 are insured against loss or damage.

We try to dispatch all goods on a same or next working day basis dependant of time of order, at certain times due to high demand there could be a slight delay, if this occurs we aim to dispatch as soon as possible.

On Bank Holidays, Weekends and Evenings you may receive notification of dispatch, this indicates the item has been picked, prepared, and sent for dispatch, it will actually be collected by Royal Mail or Interlink DPD  on the next available working day.

Should there are any problems with your order we will contact you to discuss the options.

Cables we need to terminate may take a little longer, please allow us time to terminate them.

Larger items will be dispatched by a courier on a 9am to 6:30pm delivery, if we have your email address through order, Interlink or DPD will send you a predicted delivery hour.

Optional delivery times are available at an additional cost, please contact for details.

Smaller items will be sent Royal Mail Recorded and insured.

Smaller items with a low value may not be sent recorded.

All goods must be signed for.

In the event that no one is in the driver will leave a card, you should contact the courier direct with the details on the card, to arrange an alternative time for delivery.

You must contact the courier in the time specified on their card, or goods will be returned to us and additional shipping costs may apply.

When your goods arrive;

Sign for the number of boxes you receive.

Check all boxes for visible damage, if you find them to be damaged either do not accept them, or sign DAMAGED.

You must notify us before the next working day so we can contact the courier to claim from their insurance.

Failure to do this, and we can not accept liability for any damage.