Chord Epic X Aray Analogue Interconnect 5 Pin Din to 2x RCA 1m

£500.00

5 in stock

SKU: 1214122 Category:
Chord Epic X Aray Analogue Interconnect.
Brand new in factory box.
5 Pin Din to 2 RCA 1m length  L/R-Channel.

 

EpicX ARAY Analogue DIN

The Chord Company EpicX ARAY Din Cables are the perfect choice for anyone looking to get the best possible sound from their Naim Audio products. With high-bandwidth conductors, multi-tiered shielding systems, and ARAY geometry, these cables provide superior performance with minimal noise.

The design and construction of these cables deliver the ultimate listening experience, allowing you to enjoy the rhythm, groove, and soul of your music with clarity and precision. Additionally, these cables can be used with older DIN-equipped products such as Quad for jaw-dropping results.

Featuring Chord Company ChorAlloy™ plated connector pins, silver-plated oxygen free conductors, and a zero compression strain relief system, these cables are designed for optimal sound quality and performance. All in all, if you are looking for the best sound possible from your Naim Audio system, then the Chord Company EpicX ARAY Din Cables should be your choice.

 

EpicX ARAY DIN uses high-bandwidth conductors normally found in our higher cable ranges. It also uses multi-tiered shielding systems for all conductor pairs reducing interaction between the different signals that DIN cables need to carry. This low noise high bandwidth shielding ensures that the listener obtains the maximum performance from Naim Audio products.

The design, shielding and ARAY geometry delivers the rhythm, groove and soul of the music – something that Naim users have always enjoyed from their equipment. EpicX ARAY DIN should also be auditioned with older DIN-equipped products such as Quad. The results can be quite staggering.

Connections include 4pin, 5pin, 8pin DIN-DIN in all the many variants as well as RCA-DIN, DIN-RCA, DIN-XLR, XLR-DIN and 240 degree SNAIC configurations.


Fitted with Chord Company ChorAlloy™ plated connector pins.

High bandwidth silver-plated oxygen free conductors with XLPE insulation

Foiled high frequency shielding for both signal and ground.

Overall foil shield adding further HF signal protection.

Split conductor geometry for impedance matching.

ARAY geometry dramatically improves detail and coherence.

Zero compression strain relief system avoids changes to impedance.

 

EpicX

A long-time Chord Company favourite, hand built in UK and with genuine audiophile pedigree. Similar in design to our Shawline cable but enjoying heavier gauge, silver-plated conductors with improved internal geometry. As the name suggests, Epic features our unique ARAY technology and is now further upgraded with the latest XLPE insulation where applicable.

 

The Epic range boasts two speaker cables, HDMI AOC, power cables with multiple connector options and a variety of digital connections.

 

Why XLPE?

 

The construction and specification of all Chord Company cables are constantly evolving, allowing them to adapt quickly and take advantage of the latest technology. Insulation materials in particular have made great leaps forward which is why they are moving to XLPE (cross-linked polyethylene) for EpicX ARAY.

After a succesful introduction via various Chord Company speaker cables it was logical to share the benefits of XLPE insulation with their interconnects. On the surface this would appear to be a fairly simple undertaking but, like many of these things, it got complicated..

 

Several versions and much field testing later Chord are very happy to announce that XLPE will now be incorporated into all EpicX analogue interconnects. The new upgraded EpicX ARAY analogue cable retains the same high-performance shielding architecture and ARAY technology as its predecessor.

 

Chord Company EpicX ARAY analogue audio interconnects

Epic X Analogue RCA and XLR cables are Available.
Standard lengths are 1m and 0.5m and because the Epic X is built in-house, custom lengths are available.

 

 

To connect your cable:
 
  • Ensure all equipment is switched off before fitting or removing your cables.
  • Connect the cable ensuring the arrow on the cable points away from the source component.
  • When fitting or removing cables, hold the plug and apply a gentle twisting motion.
  • Never pull the cable directly.
  • Avoid touching the contact areas on the plug.
  • Ensure you route the cable away from speaker and power cables.

Specification:

  • Geometry: Unique ARAY conductor
  • Plugs: VEE 3 RCA silver plated & 5 Pin Din silver plated New ChorAlloy
  • Insulation: XLPE insulation
  • Conductors: high-quality Oxygen Free Copper conductors OFC
  • Shielding: Dual layer heavy gauge foil
  • Length: 0.5m, 1m or custom lengths
  • Will carry a lot more detail, dynamics and better portray the individual timbres of instruments

 

 

We are an authorised Chord Cables dealership, so you can be assured of new and genuine products, covered by a full manufacturers warranty.

 

 

About The Chord Company

Chord Company has been designing, building (and refining) award-winning audio and video cables in England since 1985. Cables are not and never have been just an accessory. They are a vital part of any system and choosing the right cable is more important today than it has ever been. The correct interconnect, power or speaker cable can transform the experience and enhance the pleasure of your favorite music or movies.

 

WHAT THIS CABLE IS USED FOR:

 

CONNECT YOUR:

• 5-pin DIN(180°) to 2 RCA eg. Naim CD player to non-Naim

amplifer / pre-amplifier or another 2 channel audio input.

 

ALSO AVAILABLE:

• 2 RCA to 5-pin DIN(180°) eg. Non-Naim CD player or 2 channel audio source.

 5-pin DIN(180°) eg. Naim CD player to Naim pre-amplifier.

 

Chord Company Lifetime Guarantee

Available in 1m

We send all item/s within 1-2 days

Please have a look at our other items, Any questions please feel free to contact with us. Thanks for looking.

Additional information

Weight 0.55 kg

Specifications

  • Geometry: Unique ARAY conductor
  • Plugs: VEE 3 RCA silver plated & 5 Pin Din silver plated New ChorAlloy
  • Insulation: XLPE insulation
  • Conductors: high-quality Oxygen Free Copper conductors OFC
  • Shielding: Dual layer heavy gauge foil
  • Length: 0.5m, 1m or custom lengths
  • Will carry a lot more detail, dynamics and better portray the individual timbres of instruments

Reviews

There are no reviews yet.

Be the first to review “Chord Epic X Aray Analogue Interconnect 5 Pin Din to 2x RCA 1m”

Your email address will not be published. Required fields are marked *

Please note, free shipping for some items to EU only, shipping to other destinations will incur a charge, please see rates for your region,or contact us.

Certain Items we can only ship to Europe addresses, if you are unsure please contact us.

All items will be shipped to your registered Pay Pal Address, or the registered address of your chosen payment.

Once we receive your order, it will be processed, you will then receive a confirmation email as soon as possible.

All items over €50 are insured against loss or damage.

We try to dispatch all goods on a same or next working day basis dependent of time of order, at certain times due to high demand there could be a slight delay, if this occurs we aim to dispatch as soon as possible.

On Bank Holidays, Weekends and Evenings you may receive notification of dispatch, this indicates the item has been picked, prepared, and sent for dispatch, it will actually be collected by DPD or other COURIER on the next available working day.

Should there be any problems with your order we will contact you to discuss the options.

Larger items will be dispatched by a courier on a 9am to 6:30pm delivery, if we have your email address through order.

Optional delivery times are available at an additional cost, please contact for details.

Smaller items will be sent Polish Mail Recorded and insured.

Smaller items with a low value may not be sent recorded.

All goods must be signed for.

In the event that no one is in the driver will leave a card, you should contact the courier direct with the details on the card, to arrange an alternative time for delivery.

You must contact the courier in the time specified on their card, or goods will be returned to us and additional shipping costs may apply.

When your goods arrive;
Sign for the number of boxes you receive.

Check all boxes for visible damage, if you find them to be damaged either do not accept them, or sign DAMAGED.

You must notify us before the next working day so we can contact the courier to claim from their insurance.

Failure to do this, and we can not accept liability for any damage.