4x 20cm ATLAS HYPER 2.0 Speaker Jumper Cables (Set for Two Speakers)

 

• Cables are high pressure crimped of professional crimping tool AIRLOC HIGH PERFORMANCE TERMINATION (for maximum contact surface area).

• Terminated High Quality Copper 24 gold-plated AIRLOC 4mm SIGMA Banana spring loaded plugs, other end universal 8mm (Width of opening) Copper 24 gold-plated Spade Connectors.

• The ends finished with branded colour coded Red & Black heat shrinks sleeves.

AIRLOC a solder-free, airtight perfect fusion between the two metals of cable and plug. This ‘cold weld’ method allows the cable and plug to offer the optimum signal transfer and therefore, better sound quality. It also reduces contact resistance and ensures perfect long-term performance.

So what do I do with these jumper cables?

Well, almost all speakers come with standard grade copper jumpers (bare rails). For a quick and effective upgrade to your bi-wirable speakers simply remove the standard connectors bare rails and affix ours for instant ATLAS Jumpers.

 

REGARDING SIGMA PLUGS

We are proud with our new product and we believe it will improve the sound quality of any audio system.We offer designed to fit the 4mm amplifier and speaker terminal socket found on most high end audio separators such as Arcam, Linn, Quad and Naim amplifiers, these 4mm plugs are constructed from a gold plated red copper connector and the cable termination is by CRIMPING.This plugs is available in three different sizes and fits 2.8mm, 3.4mm and 4mm diameter cable and requires crimping with a heavy duty crimping tool to ensure consistently high levels of performance and connectivity regardless of the conductor cross-section, which has a very important effect on the transmission of a smooth signal and very low resistance unlike mostly available Brass plugs.The spring loaded pin section of the plug allows for optimal connection to the speaker or amplifier terminal socket.

 

We use professional electric and manual high quality crimping tools to terminated audio cables and we offer the possibility of terminating our products with these plugs.If you want to terminate your cables yourself you will need a crimping tool or you can contact your local Hi-Fi supplier.

Materials such as audio cables and its connections are a very important link in the entire Hi-Fi audio chain, which is why we decided to introduce new plugs, which are made of red copper and their surface is covered with gold, so that the signal flows clearly and without obstacles on the way.

We know metals such as brass or alloy are very contaminated so we want to explain it simply.

For example: a tube filled with hair restricts the flow of water more than a clean tube of the same shape and size.Likewise, electrons can flow freely and easily through a copper wire, but cannot flow so easily through a steel or brass wire of the same shape and size. The difference between copper and brass is related to their microscopic structure and electron configuration and is quantified by the property called resistivity.

Conductivity refers to the ability of a material to transfer energy. There are different types of conductivity, including electrical, thermal and acoustic conductivity. The most electrically conductive element is pure silver, followed by very close are copper and gold. Silver also has the highest thermal conductivity of all elements and the highest light reflectance.While it is the best conductor, copper and gold are more commonly used in electrical applications because copper is less expensive and gold has a much higher corrosion resistance.As silver tarnishes, it is less desirable at high frequencies as the outer surface becomes less conductive.

Brass has six times weaker conductivity than copper.

Brass oxides they are hard and highly contaminated, strongly adhering and act as an effective insulator, while copper oxides are softer and conductive. Therefore, connections and terminations of copper wires are almost the best conductor of electricity, unfortunately most of the available plugs on the market are made of brass.

 

Why did we name our plugs Sigma? because electrical conductivity is measured in Siemens per meter (S / m) and is commonly denoted by the Greek letter σ (Sigma).

 

 

Atlas Hyper 2.0 speaker cables are engineered with neutrality, speed and a wide dynamic range as primary design objectives. The Hyper 2.0 is a superb cable ideally suited for continuous listening over a prolonged period without causing listener fatigue.

Hyper 2.0 speaker cables feature very high purity (99.9999%) OFC (Oxygen Free Copper) 2.0mm² conductors with an advanced PTFE (Teflon™) dielectric. It’s a combination most unusual at this price point, and it means the cable offers an exceptional performance which is well suited to considerably more expensive systems than its price tag might suggest.

The increased diameter conductors on the Hyper 2.0 offer improved bass performance over the 1.5 version. The conductor quality and high-efficiency dielectric allow Hyper to reveal more of the performance level your equipment is capable of, being fast and dynamic without suffering the ruthlessly analytical character sometimes mistaken for additional ‘detail,’ but which is ultimately fatiguing.

 

 

                                                                                                          SPECIFICATIONS:

 

 

• *100% High quality*

• *fully tested* 

• *guarantee of quality*

• *I send all item/s within 1-2 days*

 

 

Hi Dear Watchers.I wanted to add a few words from me.

Repeatedly tested my products and reaching for feedback from my clients and I’m certain that the results are better than with the original links and that bi-wiring there is unnecessary and expensive.All in all, my customers rate this as a very good value up-grade. 

 

If you would like a different combination of spade to spade connectors, or banana to banana plugs, or different  cable lengths, please feel free to contact with us.

Please have a look at our other items, Any questions please contact with us.Thanks for looking.